MagnaClean Filter Installation to a Heating System

MagnaClean Filter Installation – Having a fully functional home central heating system with all of the latest technologies including high efficiency radiators, a condensing oil/gas boiler and state of the art heating controls is the key to running an energy efficient, cost effective and environmentally sound household. However, like all elements of any home heating system, these high tech components must be taken care of with the appropriate maintenance measures in order to guarantee that they orate at their peak levels of performance.

One thing which few people take into consideration when looking after their home central heating system is the build up of black iron oxide (a very specific form of rust commonly associated with heating systems). This is a natural process which, over time, will reduce the efficiency of a heating system. Very few heating systems are immune to its effects. What happens is, as a result of corrosion within your radiators and heating system related piping, small metal particles merge to form a nasty and thick black sludge clogging up the system. In some extreme cases, where the issue has been ignored for a significant length of time, black iron oxide build ups can lead to radiators and boilers becoming so clogged up that they become unusable (ie: gas/oil boiler breakdown).

MagnaClean Filter Installation

Having a MagnaClean Filter installed is one effective means of ensuring that black iron oxide does not take hold of your home’s central heating system. Such a filter can be installed as an upgrade to an existing central heating system or incorporated into a new one as it is being installed. It is generally considered best practice to install the MagnaClean Filter between the last radiator in your heating system and the return point of your oil/gas boiler. This minimises how much black iron oxide can enter your boiler, prolonging its lifespan and maintaining its efficiency.

Specifically designed to remove built up iron oxide from a central heating system, a MagnaClean Filter is an electrically magnetised unit which is capable of removing the vast majority, if not all, of the iron oxide, found in radiators and oil/gas boilers. This leaves your central heating system running smoothly and efficiently, allowing it to operate at its optimum levels of fuel and heating efficiency which saves you money on your home heating bills in the long run. Having a MagnaClean Filter installed has been calculated to generate an annual saving of 6% off the cost of a home’s central heating bills.

The best time to install a MagnaClean Filter is directly after you have had a Power Flush Service carried out. Power flushing loosens up and expels dirt and sludge from your radiators, cleaning out your central heating system. The MagnaClean Filter then finishes the job by removing any leftover black iron oxide, leaving your heating system running at its maximum levels of fuel and energy efficiency.

The presence of a working MagnaClean Filter will also negate the need for having more Power Flush services carried out in the future which will help you save a lot of money in the long run.

A professional plumber will be able to install a MagnaClean Filter quickly and easily once they have completed a Power Flush Service. Remember though, a MagnaClean Filter installation does not come as standard with a Power Flush Service so be sure to inform your plumber that you are looking for one when you are booking your Power Flush Service.

Much like your home’s oil or gas boiler, a MagnaClean filter should be serviced once a year to ensure that it is working at its highest levels of efficiency. Be sure to mention that you have a MagnaClean Filter installed to your heating system when you are having your gas or oil boiler serviced so that you can have both done in the same visit.

If you are looking to have either a Power Flush Service or a MagnaClean Filter Installation (or both) carried out then feel free to call DeWAR Plumbers on our phone number 01 514 3300 or send us an email.

Plumbing Advice For Your Home Or Business

Usually when confronted with a dripping or leaky tap, a person’s initial response is try and fix it themselves .
Stop for a moment and just think about it, unfortunately, this rarely works.
In many cases this causes a lot more harm than good.
Applying too much force can cause it to sheer off, snap or burst completely.
If your taps are indeed dripping or leaking it is recommended, that you seek out assistance from a professional plumber instead of going down the ‘DIY’ route. Or like some people that put there head in the sand.
A leaking pipe left unchecked can cause untold damage. The best advise here is if you see a small leak. Get it fixed or looked at by a professional plumber. This will save you more money in the end.

Shower Head Racks Be Careful

Shower heads do not respond well to having excess pressure applied to them.
That is why the use of shower head racks is not widely recommended.
Their weight puts excessive force on the shower head and can overtime, cause it to begin to separate from the wall.
These have been know to fall down and crack the bath tub. This can cause so much hassle and huge costs. This can result in leaks occurring.

Stop Your Shower’s Drains From Clogging

The purpose of a shower trap is to remove and dispose of dirt.

Over time this can result in hair, dirt, soap and grease resulting in blockages in your shower’s drain. People tend to shed hair while showering and can then accumulate into clumps.
Which will stop water from passing through the drain.
It is fairly easy to tell when your drain is beginning to block.
You will see a slow drain of water from the shower tray or bath.
A common and simple cheap way of preventing your shower’s drain from becoming blocked.
Is to install a filter on top of your shower’s draining hole.
You can purchase one of these in just about any hardware store and they are fairly cheap to buy.
Be very careful when using any form of chemical unblocker.
Take into account the fact that they are expensive.
As well as environmental factors (they are extremely bad for the environment), they do not come across as being a particularly sound investment.

Plumbing Advise

Sinks Are Not For Waste Disposal

Much like the toilets, sinks are also commonly mistaken for bins.
The most common reason behind a blocked sink piping is leftover foodstuffs from cooking grease.
Another big one also is when trades are working painters, plasters and tilers.
Cleaning out there brushes and tubs when they are finishing works.
The grease and plaster can become as hard as cement.
Sometimes you would have to remove the pipework completely to get rid of the blockage.
Liquids should only ever be poured down the drain of a sink.
Solid items should be appropriately disposed of by putting them in a bin or, if appropriate, use a compost pile.

Call DeWAR Dublin Plumbers on our phone number 01 514 3300 or email us in order to have a plumber sent out to you at a time and date that suits you.

Finding The Right Emergency Plumber Dublin

Finding The Right Emergency Plumber Dublin

When it comes to hiring an emergency plumbers in Dublin.

Some Tips for hiring a reputable recommended emergency plumber in Dublin.

Locating the Best Dublin Plumber:

1. Reputation.

The reputation of the plumbers or plumbing company is a very important factor.
Will they solve your problems rather than add to them.
If you were to hire the wrong plumber it could actually cost you more money.
Check online reviews.
Even if you see some negative reviews as long as the positive out way the negative you should be in good hands.
Ask friends and family for a recommendation.

2. Experience.

This is one of the most important factors when engaging a plumbing company.
Do they have enough plumbers working for them with knowledge .
This knowledge and experience within the firm will help to assist with solving problems.
A handyman is not a plumber just like a plumber is not a handyman.
Plumbing is something that requires a lot of hands on time in order to master.
You will not be able to simply hire someone with insufficient experience then expect perfect service and work to be completed.
Hiring an inexperienced plumber can lead to wasted money and a lot of stress.

3. Ask Friends or Family.

If you are looking for a reputable emergency plumber .
The first and best place to ask is both your friends and family.
Someone you know likely has had a great experience and some may also share a terrible experience with you.
This is all good to know when narrowing down your search.
By doing this, you can save yourself a great deal of stress in the long run.
There are a lot of things that you should be considering when it comes to hiring the best plumber or plumbing company in Dublin.
By following a lot or even some of these tips, you should be able to find the best one.

3. Pricing.

Although a very important factor when researching a plumber in Dublin.
You should not base your whole decision when pricing these services.
The lowest cost is not necessarily the best option as many customers have found out to their peril. Finding one that offers a competitive price for their services can go long ways towards helping you get the most value for your money.
You should also confirm the cost and never pay in cash and always ask for a receipt, if by hand or by email.

4. Insurance.

Most important to make sure that the plumbing company is fully insured and registered to carry out the works at your home or place of work.
Not only should they be insured but they need to have an adequate level of cover.
We hope we may have saved you time, money and the potential frustration with the process.

If you need a Recommended Dublin Plumber call DeWAR Plumbers today on 01 514 3300. Our lines are open 24 hours per day, 7 days a week.
Alternatively, you can send us an email with any queries that you might have.

Electric Shower Not Heating Water, Shower Problems Q&A

Electric Shower Not Heating Problems

Q&A – Here at DeWAR Plumbers, every day we receive emails and phone calls from people that have faults with their electric shower.
Below we have listed some of the most frequent questions we get asked about electric showers.
We’ve tried to cover most of the common problems that can occur with both mixer and electric showers.

Electric Shower

Why is water from my shower cold?

There are a number of reasons why your electric shower is running cold and has no hot water.

Try the following steps to solve the problem:

You can check the power supply to the unit and make sure the isolator switch is turned on.
Check to see if there are any tripped switches or blown fuses.
If the water coming from your electric shower is stone cold, what might be causing it is the Thermal Cut-Out (TCO) and if the shower overheats, it will cut off the power to the elements.
If the shower overheats just a little, it will cut off and reset.
If this keeps happening or the shower gets far too hot and it cuts out completely, then the electric shower will need replacing.

Shower head and hose:

The shower will only function correctly with the hose and head provided. Check to make sure this is the case.
Check to see if you have sufficient water pressure in your mains water. The minimum working pressure required for electric showers is approximately 1 bar at 8 litres per minute.

The electric shower is leaking from the bottom of the unit.

If you notice that there is water coming from the bottom of your electric shower, it may be that the PRD has activated (Pressure Relief Device).
To meet European Standards, your shower unit features an integral PRD which is designed to provide a degree of shower unit protection should an excessive build up of pressure occur within the shower.
PRD – All of the manufacturers have them and they are slightly different as to how they do them.
Mostly, it’s a ball inside that gets ejected when the pressure builds up inside the heating tank.
What normally causes the build up of pressure would be due to a damaged hose or blocked shower head.
My electric shower has a low flow of water

Follow these steps to try to find the cause of the problem:

Check the power supply to the electric shower is working.
Make sure the water supply to the shower is turned on and the isolation valve is fully opened.
Check to see if the water control is turned fully clockwise.
Turn the flow control knob anticlockwise to increase water flow.
Check that there isn’t a blockage:
- Disconnect the head from the hose and run the shower. If water flows normally then the head is blocked.
- If there is no flow of water after removing the head, remove the hose from the unit. If water flows then the hose is blocked.
- If there is still no flow once the hose has been removed then there is a possible restriction in the supply to the shower, or debris in the filter.

The electric shower keeps stopping and starting

This is the number one fault with electric showers.

If you find the electric shower stops working completely or cuts off when you are halfway through your shower still with shampoo in your hair.
The solenoid valve is usually the culprit.
The coil in the part normally breaks down.
When the coil is working it will lift a plunger inside the solenoid valve and allows the water into the shower.
When the coil breaks down, the water stops running and that is what causes the electric shower to stop working.

If your electric shower is still causing you problems, then why not give us a call here at Dewar Emergency Dublin Plumbers, or call today on 01 514 3300. Our lines are open 24 hours per day, 7 days a week. Alternatively, you can send us an email with any queries that you might have.

Facebook